- JoinCustomLobbyResponse now includes ActiveRules so the guest's rule editor
pre-populates from the lobby's current effective rules instead of hardcoded
defaults; previously all fields in a suggestion were sent as defaults, causing
accepted suggestions to reset rules to defaults.
- game_screen.gd: placement tile highlights are now re-applied on every state
update while the player hasn't placed yet, not only on the first entry into
PLACEMENT mode; fixes highlights disappearing when the opponent places their
ArchSpirit and a delta arrives mid-placement.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Server:
- GameActivityRegistry singleton tracks subscribed clients
- game.subscribe_activity handler: registers client, returns active session IDs
- game.unsubscribe_activity handler: deregisters client
- BroadcastActivityAsync helper in GameHandlerBase (mirrors spectator push pattern)
- GamePlaceArchSpiritHandler broadcasts "started" when both players have placed
- FinalizeGameAsync broadcasts "ended" to all subscribers
Client:
- Settings.skybox_mode: "live" | "cdn" | "off" (default: "live"), persisted to cfg
- Game.game_activity signal forwarded from game.activity push
- game_screen.gd: live mode sets near-black procedural sky; subscribes to activity
feed; each active session is an emissive sphere star (280-unit radius, blue-white)
that fades in on start, twinkles via sine tween, and flash-explodes on end
- CDN and Off modes preserved; hot-swap supported mid-game via Settings.settings_changed
- InGameSettings: SkyboxModeOption OptionButton (Live / CDN / Off)
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- SkyboxDefinition entity (catalog schema) with static/animated support
- EF migration: catalog.skybox_definitions table
- content.get_skybox_config handler returns active skybox definition
- SkyboxManagerPage.razor: full CRUD admin UI with inline editing,
activate/deactivate, and animated frame config
- NavMenu.razor: Skyboxes link under Content section
- game_screen.gd: fetches active skybox on ready; applies as
PanoramaSkyMaterial on WorldEnvironment; animated skyboxes cycle
frames via Timer; procedural sky kept as fallback when none active
Also fixes inverted camera pan (delta.x / -delta.y signs corrected).
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
After any game action, push a structured GameStateDelta instead of
the full GameStateDto to both players and spectators. Full state is
preserved for: initial connect (game.ready), reconnect/get_state,
spectate ACK, and turn-timer expiry.
Server:
- GameMessages.cs: add GameStateDeltaPush, GameStateDelta, TileDelta,
UnitDelta, PlayerStatsDelta, GameMetaDelta record types
- GameEngine.cs: make ToCardDto internal (used by differ)
- GameStateDiffer.cs: new file — ComputeDelta (viewer-specific) and
ComputeSpectatorDelta; diffs tiles, field units, hands, discards,
archs, player stats, and game meta
- GameHandlerBase.cs: PushStateToPlayersAsync gains optional prevState
param; when provided pushes delta, else falls back to full push
- All 10 action handlers: pass prev state to PushStateToPlayersAsync
Client:
- Game.gd: _state_version tracking, _apply_delta, _merge_unit_delta,
request_sync, game.state_delta push handler with auto-resync on gap
- in_game_settings.gd + InGameSettings.tscn: Request Sync button
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Tier 1 (5 min, unchanged):
- Active player: game.inactive_warning — "you may be forfeited"
- Waiting player: game.opponent_inactive — "Accept Forfeit / Wait"
Tier 2 (10 min — mutual idle):
- If the game is still stalled after 10 min the waiting player also
hasn't claimed forfeit, so both are treated as mutually idle
- Sends game.both_idle_warning to BOTH players
- Client closes any open tier-1 dialogs and shows "Wait" only —
no concede or force-concede available
- Prevents the tactic of both players going idle to pressure the
other into conceding
Monitor service now prunes notified sets on each poll so sessions
that become active again can be re-notified if they stall again.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Server (GameUpdateLobbyRulesHandler):
- Allow update_rules in both Open (solo) and Full lobby states,
not just Full — was silently failing when no guest had joined yet
- Push to guest only when GuestAccountId is present (was crashing
with null deref in Open state if status check had been bypassed)
Client (CustomLobby.gd):
- update_rules ACK callback now emits lobby_rules_updated immediately
from the ACK payload instead of relying solely on the lobby_updated push
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Board.Create():
- Base1 pool: {Lake, Hill, Forest, Field, Aether} (no Void)
- Base2 pool: Base1 pool + Void; same pct roll independently
- If Base2 draws Void → both slots stay Void (no random Gateway tiles)
- Random tiles are now either fully compound or fully void
AffinitySystem.IsAffinityValid():
- PerfectAether tile (Aether+Aether) accepts any of the four elemental
basics {Lake, Hill, Forest, Field} as valid channeling targets
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Previous migration file was empty (generated before entity changes were saved).
Deleted the empty migration, regenerated with correct Up/Down:
- ADD COLUMN StartingRandomTilePct (int, not null, default 0) on game.game_rule_sets
- ADD COLUMN StartingRandomTilePctOverride (int, nullable) on game.custom_lobbies
Applied to production DB.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- Admin CustomLobbiesPage: add Delete button (hard DB remove with confirm dialog)
shown on every lobby row; Cancel remains for Open/Full lobbies only
- CollectionGetCardsHandler: rename inner-scope variables (groupedTotal/groupedDtos)
to fix CS0136 compiler error from same-name variables in nested vs outer scope
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- Skip ActivationConditions with Subject=="Target" in ActivateAbility (mirrors
AbilitiesJson code path) so conditions like IsOnTileWithAffinity{Target,Lake}
aren't evaluated against the source unit at activation time
- Add RevokePassivesForSource call in ReturnToHandEffect before removing the
unit from the field, matching SendToDiscardEffect pattern
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Add CustomLobbyStatus.Completed; in FinalizeGameAsync, query the lobby
linked via GameSessionId and set Status=Completed when the game ends.
This removes finished games from the active-games browser (list_active
only returns Started lobbies) and from the admin "active" count.
Admin page: add Completed filter option, dark badge, include Started
lobbies in the always-loaded set so stale in-progress games are visible.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- init_screen.gd: handle null sessionId from game.get_active_session.ack
properly — str(null)="<null>" which passed the is_empty() check causing
every player to see "active game in progress (null phase)" on login
- CustomLobby.gd: call clear_state() at the start of create() and join() so
that i_am_ready/partner_ready are reset between lobbies — fixes players
appearing instantly ready when entering a new lobby after a previous game
- game_screen.gd: in _setup_spectator_ui(), hide _settings_btn (prevents
accessing the Concede button) and add a programmatic "Leave" button that
calls Game.stop_spectating() and navigates back to FreePlayScreen
- CustomLobbiesPage.razor: add Cancel button (admin) for Open/Full lobbies;
directly sets Status=Cancelled and refreshes the list
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- GameLeaveCustomLobbyHandler: return success silently for Started/Cancelled
status (allows the Leave button to work regardless of lobby state); inject
IClientPush and send LobbyPartnerLeftPush to remaining participant when
someone leaves a Full lobby; reset ready flags when guest leaves
- GameMessages: add LobbyPartnerLeftPush(LobbyId, Reason)
- CustomLobby.gd: add partner_left signal; handle game.custom.lobby.partner_left
push by calling clear_state() then emitting partner_left
- lobby_room_screen.gd: connect/disconnect partner_left; show toast + navigate
back to FreePlayScreen when partner leaves
- free_play_screen.gd: extract auto-select into _auto_select_deck() helper to
fix GDScript parse error (comma inside multi-line if-body within lambda)
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- game.custom.get returns full CustomLobbyDetailDto: all effective rules (overrides
merged with GameRules.Default), host/guest account IDs, status, GameSessionId.
- CustomLobbyDetailDto includes Status string, GuestAccountId (nullable),
GameSessionId (nullable); richer than the browse-list CustomLobbyDto.
- GetCustomLobbyRequest / GetCustomLobbyResponse added to GameMessages.cs.
- ServiceRegistration: registered GameGetLobbyHandler as transient IMessageHandler.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- VoteSessionService singleton: ConcurrentDictionary<Guid, ActiveVote> keyed by lobbyId.
TryStart prevents concurrent votes; Cast resolves immediately on any rejection or all approval.
- GameSavePresetHandler (game.custom.preset.save): captures lobby override columns into
CustomRulesOverride JSON and persists as LobbyPreset; participants only.
- GameListPresetsHandler (game.custom.preset.list): returns all presets owned by caller.
- GameDeletePresetHandler (game.custom.preset.delete): owner-only delete.
- GameProposePresetHandler (game.custom.preset.propose): host-only in Full lobby;
starts vote with guest as sole voter; pushes game.custom.preset.vote_requested to guest.
- GameVotePresetHandler (game.custom.preset.vote): casts yes/no;
Approved → applies preset overrides to lobby DB + pushes game.custom.lobby_updated to both;
Rejected → pushes game.custom.preset.vote_rejected to both.
- GameMessages.cs: SavePreset/ListPresets/DeletePreset/ProposePreset/VotePreset
request/response types; LobbyPresetDto; PresetVoteRequestedPush, LobbyUpdatedPush,
PresetVoteRejectedPush.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- SpectatorRegistryService singleton: ConcurrentDictionary<Guid, ImmutableHashSet<Guid>>
tracking spectators per session. Static Instance for use in static base-class helpers.
- GameEngine.ToDtoSpectator: delegates to ToDto(state, "") — both hands hidden.
- GameHandlerBase.PushStateToPlayersAsync: extended to push hand-hidden state_update
to all registered spectators via SpectatorRegistryService.Instance.
- GameHandlerBase.FinalizeGameAsync: pushes game.over to spectators then calls
RemoveSession to evict the entry from the registry.
- GameSpectateHandler (game.spectate): validates session Active, registers spectator,
returns current spectator-view state as ack.
- GameStopSpectatingHandler (game.spectate.stop): unregisters the caller.
- GameMessages.cs: SpectateRequest/Response, StopSpectatingRequest/Response.
- ServiceRegistration.cs: register SpectatorRegistryService singleton + both handlers.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Phase 2 — GameEngine:
- Draw(): now draws DrawPerTurn+DrawPerTurnBonus cards per call (was always 1);
enforces HandSizeCap with block-draw or auto-discard (DiscardOnMaxHand)
- EndTurn(): returns (GameState, bool gameOver); applies MpBuff to all next-player
units at turn start; checks TurnLimit and sets GameOver phase if exceeded
- GetTurnLimitWinner(): helper returning winner/loser by ArchSpirit HP (P1 on tie)
- ValidateDeck(): new public method checking MinDeckSize, MaxDeckSize, MaxArchTier1
- GameRules note: new fields are already in place from Phase 1
Phase 7 — Handlers + Messages:
- CustomRulesOverride: +9 new nullable fields (HandSizeCap, DiscardOnMaxHand,
MaxDeckSize, MinDeckSize, MaxArchTier1, TurnTimerSeconds, TimeLimitMinutes,
TurnLimit, MpBuff)
- CustomRulesDto: +9 matching fields + HasPassword bool
- CreateCustomLobbyRequest: +Password field
- JoinCustomLobbyRequest: +Password field; handler now validates password
- ListCustomLobbiesRequest: +NameSearch, ShowPasswordProtected filters
- GameCreateCustomLobbyHandler: full rule merge + ToDto covers all new fields
- GameJoinCustomLobbyHandler: password check + full rules construction incl. new fields
- GameListCustomLobbiesHandler: full DTO mapping + NameSearch/password filters
- GameEndTurnHandler: injected identityDb+eventBus; handles TurnLimit game-over
using same pattern as GameAttackHandler (set session fields before SaveStateAsync)
- GameDrawHandler: update deconstruct to discard unused drawn list (_)
- CustomLobbyGuestJoinedPush: new push type (used in Phase 6)
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- Extend CustomLobby with 12 new rule override columns (Password,
HandSizeCap, DiscardOnMaxHand, MaxDeckSize, MinDeckSize, MaxArchTier1,
TurnTimerSeconds, TimeLimitMinutes, TurnLimit, MpBuff, BoardWidth/Height)
- Extend GameRuleSet with matching non-nullable rule fields (same set)
- Extend GameRules record with 9 new rule fields (all default to 0/false)
- Add LobbyPreset entity (owner-scoped named rule presets)
- Register LobbyPreset in GameDbContext with index on OwnerAccountId
- Migration: AddCustomGameExtensions (applied to pg-forge-01)
- Add custom-game-system-plan.md with full 8-phase architecture plan
and deferred features tracking list
- Also includes: AbilityBuilder ValueExpr dropdowns + help panel,
Affinity enum/system fixes (from prior sessions)
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Two root causes fixed:
1. Race condition (primary cause): SaveStateAsync committed the
transaction with Phase=GameOver in StateJson, but session.Status
was not set to Completed until a separate SaveChangesAsync in
FinalizeGameAsync. If the server crashed or any exception was
thrown between those two calls, the session was left Active with
a GameOver state — causing the "active game" prompt on next login.
Fix: each game-over handler (concede, force_concede, attack) now
sets session.Status/WinnerAccountId/WinCondition/EndedAt BEFORE
calling SaveStateAsync, so all fields commit atomically in the
same transaction.
2. Wrong save order in FinalizeGameAsync: identityDb.SaveChangesAsync
(ELO update) ran before gameDb.SaveChangesAsync (Status=Completed).
Any transient identity-DB error left the session permanently Active.
Fix: gameDb is saved first; ELO runs after, so a failed ELO update
never causes a ghost match.
3. Defensive startup heal (GameStartupCleanupService): on server
start, Active sessions whose StateJson contains Phase=GameOver are
now detected and marked Completed. game.over is pushed to any
still-connected clients so they can exit cleanly.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Client: Repentance/Instinct cards with Active abilities in abilitiesJson now
enter ABILITY_TARGET mode instead of sending play_card immediately. Units on
matching tile affinities (IsOnTileWithAffinity) are highlighted in blue; the
player clicks a target unit and the card is sent with the selected unit target.
Server: FireCardEffects now also processes Active abilities from AbilitiesJson
(after the existing EffectsJson path). Source-side ActivationConditions are
checked; target-side conditions (Subject=Target) are trusted from the client.
New Game.gd helper: send_play_card_with_targets sends play_card with a targets
array so the server can route unit selections to the active ability handler.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Issue 1 — ActivationConditions on passives were never checked:
- ApplyPassivesForSource and ApplyPassivesToNewTarget now evaluate
ActivationConditions against the source unit before executing each
passive ability (e.g. IsOnTileWithAffinity: Lake only grants the buff
when the unit is actually on a Lake tile).
Issue 1 — Passives not re-evaluated on movement / tile changes:
- Added ReEvaluateConditionalPassives(state): for every unit with at
least one conditional passive, revoke all WhileSourceOnBattlefield
effects then reapply with conditions re-checked. Units without
conditional passives are skipped with zero overhead.
- Called after MoveUnit (unit changes tile affinity),
ActivateAbility (ability may change board state),
and ChannelCard Terramorpha path (tile affinities change).
Issue 2 — INSUFFICIENT_TARGETS thrown from ApplyPassivesToNewTarget:
- ResolveTargets: when restrictTargets is set (passive-to-new-target
mode only) and filtering produces zero candidates, return [] silently
instead of throwing. An ExactSelf source-buff simply has no valid
target among the new unit — that is expected, not an error.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
When admin replaces a model/art file via the CDN browser, the S3 ETag is
now captured and stored on CardAsset.ContentETag. The ETag is included in
the content sync DTO (CardAssetDto) so clients receive it on every sync.
Client-side ModelCache now keys its disk cache on sha256(url + "#" + etag)
instead of sha256(url), so updating a file at the same CDN path busts the
disk cache automatically. A _CACHE_VER="v2" sentinel purges old-scheme
.bin files on first launch after the client update.
Changes:
- CdnUploadResult: add string? ETag field
- S3CdnClient: capture ETag from PutObjectAsync response
- CardAsset: add string? ContentETag property
- Migration 20260318000001_AddAssetContentETag: add content_etag text column
- ContentMessages: add string? ContentETag to CardAssetDto
- ContentDtoMapper: map ContentETag in CardAsset → CardAssetDto
- CdnBrowser.razor: UploadFileToKeyAsync returns Task<string?> (ETag);
ReplaceAsync calls PropagateAssetETagAsync which updates CardAsset rows
and touches CardDefinition.UpdatedAt to trigger a version bump
- ModelCache.gd: versioned disk key + cache migration + etag parameter on
load_model() and evict()
- game_screen.gd: pass model_asset.contentETag to load_model / retry chain
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
AbilityDefinition gains an optional Duration property. When set it is used
as forceDuration for every ExecuteActions call that resolves that ability,
overriding whatever per-action Duration individual effects specify.
- Active abilities: def.Duration is threaded through as forceDuration
- Triggered abilities: same
- Passive abilities: def.Duration ?? WhileSourceOnBattlefield (both
ApplyPassivesForSource and ApplyPassivesToNewTarget paths)
AbilityBuilder admin panel:
- Duration row added after type-specific fields (dropdown + N input for ForNTurns)
- "WhileSourceOnBattlefield" added to the DurationTypeValues list
- Parse and compile paths updated for the new Duration field
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
The attack resolution and sacrifice paths in GameEngine.cs bypassed
RevokePassivesForSource (and EvaluateAurasOnLeave for combat deaths).
Now all three exit points call both aura/passive cleanup before removing
the unit from the board.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
DefinitionToInstance and ToFieldCard both omitted copying Genus, so
HasGenusCondition and GenusContainsFilter always evaluated against null
(returning false). All three data-flow gaps are now fixed:
- DefinitionToInstance: def.Genus?.ToList() → CardInstance.Genus
- ToFieldCard: source.Genus?.ToList() → FieldCard.Genus
- FilterMatches: GenusContainsFilter now handled (was falling to _ => true)
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Passive abilities (e.g. 'All Merfolk +1 attack') were never executed
because AbilityType.Passive had no runtime processing.
Three root causes fixed:
1. Passive abilities are now applied when units enter the battlefield
and reversed when they leave (new DurationType.WhileSourceOnBattlefield).
- ApplyPassivesForSource: runs a unit's passives against all current targets
- ApplyPassivesToNewTarget: applies existing passives to a newly-entered unit
- RevokePassivesForSource: reverses all passive effects on source death/leave
- Hooked into GameEngine.Channel, Transition and AbilitySystem
ReturnToBattlefield, SummonToken, KillUnit, SendToDiscard
2. Action conditions with Subject="Target" now filter per-target instead of
aborting the entire action (which evaluated against ctx.Source).
Source-level conditions still gate the whole action; target-level ones
are evaluated individually and skip non-matching targets.
3. ExecuteActions/ResolveTargets gain a restrictTargets parameter used by
ApplyPassivesToNewTarget to avoid double-applying existing passive buffs
to units that already received them when the passive source entered.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Replace raw JSON textarea for trigger event with per-type dropdown
and input fields. Each of the 39 trigger types now renders only its
relevant fields (Player, Ownership, SourceOwnership, TargetOwnership,
UnitType, CardType, DamageType, Amount, Stat, Cause, CausedBy,
RuinOwnership, OccupantOwnership, UnitOwnership, AuraOwnership).
- AbilityDraft gains 15 structured trigger fields replacing TriggerJson
- RenderTriggerFields: per-type RenderFragment (mirrors RenderConditionFields)
- CompileTrigger: builds TriggerEvent JsonObject from draft fields
- ParseJson: reads all trigger fields from existing TriggerEvent JSON
- SelectTrigger: resets all fields to sensible defaults on type change
- New helpers: BuildStringInput, BuildOptionalAmountInput, BuildOptionalStringSelect
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
**Feature 1 — Model retry (client)**
- `ModelCache.gd`: add `evict(url)` to remove failed entries so re-download is possible
- `game_screen.gd`: when GLB load fails, `_schedule_model_retry` queues a 60-second
retry (up to 10 attempts); `_do_model_retry` evicts + re-downloads and swaps the
placeholder mesh for the real model if/when it succeeds
**Feature 2 — Rejoin on login (server + client)**
- Server: `GameGetActiveSessionHandler` (`game.get_active_session`) — returns the
caller's active session ID + phase, or null when no session exists
- Client: `init_screen.gd` checks for an active session after content sync; shows
a "Rejoin / Concede" dialog when one is found; rejoin navigates to GameScreen with
the session ID already set so `send_ready` → `AlreadyStarted` → `_fetch_state`
**Feature 3 — 5-minute inactivity detection (server + client)**
- `GameSession`: add `LastActionAt` column + EF migration
(`20260317000001_AddLastActionAt`)
- `GameHandlerBase.SaveStateAsync`: sets `session.LastActionAt` on every action
- `GameInactivityMonitorService`: background poll every 60 s; when a session hasn't
had an action in ≥ 5 min, pushes `game.inactive_warning` to the stalled player and
`game.opponent_inactive` to their opponent (once per session per server lifetime)
- `GameForceConcedeHandler` (`game.force_concede`): lets the waiting player claim
the win; validates caller is not the active player and `LastActionAt` is stale
- `Game.gd`: new `opponent_inactive` / `inactive_warning` signals + push handlers +
`send_force_concede()` helper
- `game_screen.gd`: handles `opponent_inactive` with Accept/Wait dialog;
handles `inactive_warning` with informational popup
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Replace the plain hex text input + static swatch with a native
<input type="color"> (Bootstrap form-control-color) + text field
combo. Clicking the swatch opens the browser's colour picker and
updates the hex field in real-time. An × button clears the value
back to null (no tint). The text field still accepts manual hex
entry and the picker reflects the change on the next interaction.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
- Move Scale and Tint Colour from Basic tab into Assets tab under a
new "3D Model Config" section (defaults: Scale=null→1.0, Tint=null)
- Model3D assets: folder icon opens a CDN picker modal that lists all
*.glb / *.gltf from the models/ bucket (cached after first load),
filterable by filename, with a list-group UI
- Art2D assets: same picker pattern but pulls from cardart/ bucket and
shows image thumbnails in a responsive grid
- Model3D inline 3D preview via <model-viewer> appears below the URL
when set; "Load animations" button invokes the same JS interop as
CdnBrowser and populates an animation dropdown
- Art2D inline image preview appears below the URL when set
- Changing or uploading a URL clears cached animation state so the
Load button reappears for the new file
- JS guard (window.sorCdn = window.sorCdn || {}) prevents double-
definition when CdnBrowser is also loaded in the same session
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Visual changes (client):
- 0.1 gap between all tiles (TILE_SPACING = 1.1)
- Placeholder tiles (no 3D model) are now 0.5 height instead of random
0.8-1.0, making undecorated tiles visually distinct
- Placeholder tiles load a 2D CDN texture via HTTP and apply it as the
albedo on the BoxMesh (same affinity-per-shape lookup as 3D models)
- Placeholder tiles also attach a stalagmite bottom model, matching the
look of fully-decorated tiles
Server:
- TileModelBinding.TexturePublicUrl (nullable text) added to entity,
migration 20260317000001_AddTileTexture applied to DB
- TileModelDto extended with TexturePublicUrl
- ContentGetTileModelsHandler includes TexturePublicUrl in response
Admin (/content/tile-models):
- New "Square Texture" and "Hex Texture" columns in the bindings table
- Texture picker modal browses the CDN textures/ prefix and shows image
thumbnails; select + assign writes TexturePublicUrl to the binding
- Texture can be assigned without a 3D model (creates a binding row
with empty model fields)
ContentCache:
- Caches texturePublicUrl alongside modelPublicUrl from tile_models response
- New get_tile_texture_url(affinity, shape) → String accessor
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
## Tile height variation (fix)
Tile tops now visibly vary (0.8–1.0) from a fixed bottom at world Y=0.
Previously the top was fixed and the variation was only visible underneath.
Heights are seeded by tile coordinate so they're deterministic per board.
Unit y_offsets and highlight positions update to match per-tile height.
## Stalagmite tile bottoms
Server: new TileBottomModel entity + migration (catalog.tile_bottom_models),
content.tile_bottoms handler returns all active CDN URLs.
Admin: "Tile Bottom Models" section in the Tile Model Manager page —
add/toggle active/delete entries with CDN picker.
Client: ContentCache fetches + disk-caches the URL pool; _try_load_tile_model
picks a random URL and attaches it flipped below the tile model as a
stalagmite using the existing _fit_model_to_tile scale logic.
## Live content refresh
ContentCache schedules start_sync() every 5 minutes after sync_complete so
card definitions, tile models, and bottom models are refreshed in the
background without restarting the client.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Uploading a replacement GLB with changed animation names to the same
folder/fileName path silently overwrote the S3 object but left the URL
unchanged. ModelCache keyed its disk cache and in-memory cache by URL,
so all clients continued loading the stale model indefinitely.
Fix (CardEditor.razor):
- Asset uploads: append _yyyyMMddHHmmss timestamp to the filename stem
before calling UploadAsync, e.g. merlock_20260316_143022.glb.
- Animation uploads: same treatment.
- Result: every upload produces a unique URL; the card asset record is
updated to that URL; ModelCache sees a new key and fetches fresh bytes.
Fix (HttpCdnClient.cs):
- Set Cache-Control: public, max-age=31536000, immutable on uploaded
objects. Since keys are now unique-per-upload, aggressive caching is
safe and avoids unnecessary re-downloads of unchanged assets.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Model facing: GLB models exported from Blender arrive in Godot facing +Z,
not -Z. Changed _facing_to_base_angle default case from 0 (north/-Z) to
PI (south/+Z). Explicit "north" case added. Updated admin dropdown label
from "Default (north)" to "Default (south / Blender GLB)" to match.
Stale game state: when matchmaking.match_found is received, clear Game.state
so the new GameScreen always calls send_ready() rather than rendering the
previous (ended) game's state. Fixes same-players-re-match ending up in
the already-completed session.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>