Add day-by-day mead schedule

This commit is contained in:
Shard
2026-07-17 12:25:31 +00:00
parent a03d86bcb2
commit cf2c2e5940
20 changed files with 782 additions and 2 deletions
+2 -1
View File
@@ -23,7 +23,8 @@ A beginner-friendly project plan for making a **3 gallon honey-butter flavored m
3. Brew using [`process.md`](process.md).
4. Track measurements in [`logs/fermentation-log.md`](logs/fermentation-log.md).
5. Use [`day-1-brew-day.md`](day-1-brew-day.md) on brew day.
6. Use [`bench-trial.md`](bench-trial.md) before adding butter/butterscotch extract to the whole batch.
6. Follow [`schedule.md`](schedule.md) for day-by-day reminders through aging/bottling.
7. Use [`bench-trial.md`](bench-trial.md) before adding butter/butterscotch extract to the whole batch.
## Safety and quality rules
+54
View File
@@ -0,0 +1,54 @@
# Backsweeten + Bench Trial Day
Do this at least **24 hours after stabilization**.
## Goal
Find the honey-butter flavor profile in samples before changing the whole batch.
## Start with sweetness
Pull several 100 ml samples. Test honey additions first before extracts.
Suggested sample variables:
- Control: no addition
- Low honey
- Medium honey
- High honey
Once sweetness is close, test vanilla/butter/butterscotch.
## Butter/butterscotch extract rule
Use tiny measured additions. Do **not** pour extract directly into the full batch by instinct.
Use [`bench-trial.md`](bench-trial.md) for scaling.
For a 3 gallon batch:
```text
full batch extract ml = sample extract ml in 100 ml × 113.56
```
## Likely full-batch additions
Only after bench trial:
- 1–2 lb honey, to taste
- Vanilla bean/extract, to taste
- Tiny butter extract, if needed
- Tiny butterscotch extract, if needed
- Optional microscopic salt solution
- Optional acid/tannin if sweetness tastes flat
## After adding
1. Mix gently without splashing.
2. Reattach airlock.
3. Let flavors integrate before judging.
4. Record exact amounts.
## Do not bottle immediately
After backsweetening, give it time and confirm no renewed fermentation before bottling.
+56
View File
@@ -0,0 +1,56 @@
# Bottling and Drinking
## Goal
Package the finished still mead safely and decide what to drink now vs age longer.
## Bottle only when
- Gravity is stable.
- Mead is stabilized if backsweetened.
- No signs of renewed fermentation.
- Flavor is acceptable.
- Clarity is acceptable.
- Bottles/caps/corks are appropriate for still mead.
## Bottle options
| Bottle type | Good for this batch? | Notes |
|---|---|---|
| Swing-top bottles | Yes | Beginner-friendly and reusable; verify they seal well. |
| Beer bottles + crown caps | Yes | Reliable and cheap; good if you have a capper. |
| Cork-finish wine bottles | Yes | Traditional; use #9 corks and a corker. |
| Random screw-top bottles | Maybe | Okay for short-term still mead only if caps seal well; not for carbonation. |
## Bottling steps
1. Clean bottles thoroughly.
2. Sanitize bottles, caps/corks, bottling wand, siphon, and tubing.
3. Move mead gently to bottling position.
4. Siphon without splashing.
5. Fill bottles, leaving appropriate headspace.
6. Cap/cork/close.
7. Label bottles with batch name and date.
8. Store cool and dark.
## Drinking plan
Open one young bottle for learning. Save the rest.
Suggested tasting schedule:
- 1 bottle at bottling or 1 week after bottling
- 1 bottle at 1 month
- 1 bottle at 3 months
- Save some for 6+ months if possible
## Notes to record
```text
Bottling date:
Final gravity:
Bottle count:
Closure type:
Flavor at bottling:
First tasting notes:
```
+38
View File
@@ -0,0 +1,38 @@
# Bulk Aging Month 1–3
## Goal
Let the mead clear, mellow, and integrate before bottling or drinking.
## Monthly checks
- Airlock liquid level
- Clarity
- Sediment thickness
- Aroma
- Small taste sample if desired
- Gravity if there is any sign of renewed fermentation
## When to rack again
Consider another rack if:
- There is a thick sediment layer.
- The mead is clearing well and you want it off sediment.
- You can rack with minimal oxygen exposure.
Do not rack repeatedly for no reason; each transfer risks oxygen.
## Bottling readiness
Bottle only when:
- Gravity is stable.
- Mead tastes good enough or is on the right path.
- No signs of renewed fermentation.
- Mead is as clear as you want it.
- You have the right bottles/caps/corks for still mead.
## Expected reality
It may be drinkable young, but dessert mead often improves significantly over 1–3+ months.
+35
View File
@@ -0,0 +1,35 @@
# Day 10 — Gravity Check
## Goal
Get a real measurement of fermentation progress.
## Do this
1. Sanitize wine thief/turkey baster, hydrometer, and test jar.
2. Pull a sample.
3. Take and record gravity.
4. Take and record temperature.
5. Taste the sample if you want; do not pour it back.
## What the reading means
- If gravity is still high but dropping, keep waiting.
- If gravity is low and fermentation is slowing, keep waiting for stability.
- If gravity is unchanged from earlier checks and still sweet, ask Shard before intervening.
## Important
Do not rack just because it is Day 10. Racking waits until primary is substantially done and gravity is stable or near stable.
## Log line template
```text
Date/time:
Day: 10
Gravity:
Temp:
Activity:
Taste/aroma:
Notes:
```
+37
View File
@@ -0,0 +1,37 @@
# Days 11–13 — Wait and Observe
## Goal
Let primary fermentation continue without unnecessary oxygen exposure.
## Do daily
- Check airlock liquid.
- Check temperature.
- Observe activity and smell.
- Keep fermenter undisturbed.
## Do not do
- Do not add nutrients by default.
- Do not add flavoring.
- Do not stabilize.
- Do not bottle.
## Optional
If Day 10 gravity was surprising, or if activity seems stalled, take another gravity reading. Otherwise wait for Day 14.
## If asking Shard for help
Send:
```text
Current day:
Last gravity:
Current gravity if measured:
Temp:
Smell:
Activity:
Photo/description if anything looks weird:
```
+41
View File
@@ -0,0 +1,41 @@
# Day 14 — Primary Assessment
## Goal
Take another gravity reading and decide whether primary is still active, nearly done, or ready to keep waiting toward racking.
## Do this
1. Sanitize wine thief/turkey baster, hydrometer, and test jar.
2. Pull a sample.
3. Take and record gravity.
4. Take and record temperature.
5. Taste the sample if desired; do not return it.
## Decision guide
| Situation | What to do |
|---|---|
| Gravity still dropping | Keep waiting. |
| Gravity low but not confirmed stable | Keep waiting and recheck later. |
| Same gravity as Day 10 and fermentation seems quiet | Possibly near complete; plan another stability check before racking. |
| Still very sweet/high gravity and not moving | Ask Shard; may be stalled. |
## Do not do yet unless stable
- Do not rack solely because it is Day 14.
- Do not stabilize.
- Do not backsweeten.
- Do not flavor.
## Log line template
```text
Date/time:
Day: 14
Gravity:
Temp:
Activity:
Taste/aroma:
Notes:
```
+34
View File
@@ -0,0 +1,34 @@
# Days 15–21 — Stable Gravity Window
## Goal
Confirm primary fermentation is complete or nearly complete before racking.
## What to do
- Keep temperature stable.
- Check airlock liquid.
- Let sediment compact.
- Take a sanitized gravity reading every few days, not every day.
## Ready-to-rack signs
Racking to secondary is reasonable when:
- Gravity is stable across 2–3 readings several days apart.
- Primary activity has slowed substantially.
- A sediment layer has formed.
- No signs of contamination.
## Not ready signs
Keep waiting if:
- Gravity is still dropping.
- Fermentation is vigorous.
- There is thick active foam/krausen.
- You are unsure whether gravity is stable.
## Reminder
Do not stabilize or backsweeten in primary. Those steps come after fermentation is finished and the mead has been racked/cleared enough to work cleanly.
+45
View File
@@ -0,0 +1,45 @@
# Day 2 — First Nutrient Addition
Approximate timing: **18–30 hours after pitch**. For Jason's normal schedule, doing this around **9 PM EDT** is fine.
## Goal
Support early fermentation with the first staggered nutrient addition.
## Do this
1. Wash hands.
2. Sanitize anything that may touch the mead: spoon/paddle or degassing wand, thermometer, nutrient spoon/scale gear if needed.
3. Check and record the fermenter temperature.
4. Look for signs of fermentation: bubbles, foam/krausen, yeasty/honey smell.
5. **Degas gently first.** Stir slowly at first because CO₂ can foam up.
6. Once the must is less fizzy, add:
```text
3 g Fermaid O
```
7. Stir gently to distribute.
8. Replace lid and airlock.
9. Confirm airlock has liquid to the fill line.
10. Record notes in `logs/fermentation-log.md`.
## Watch-outs
- Nutrient added to fizzy must can create a foam volcano.
- Do not add vanilla, extracts, stabilizers, acid, tannin, or backsweetening honey.
- If it smells strongly rotten/eggy, note it and ask Shard before making big changes.
## Log line template
```text
Date/time:
Day: 2
Temp:
Gravity: optional / usually skip today
Added: 3 g Fermaid O
Activity:
Smell:
Foam/krausen:
Notes:
```
+47
View File
@@ -0,0 +1,47 @@
# Day 22+ — Rack to Secondary If Stable
This is **not automatic on Day 22**. It is the first reasonable window if gravity has stabilized.
## Goal
Move the mead off the gross lees/sediment into a 3 gallon carboy for clearing and aging.
## Only rack if
- Gravity is stable across 2–3 readings several days apart.
- Fermentation is substantially complete.
- You have a clean/sanitized 3 gallon carboy ready.
- You can minimize splashing and headspace.
## Equipment
- 3 gallon carboy
- Bung and airlock
- Auto-siphon
- Tubing
- Sanitizer
- Spray bottle
- Optional: labels/tape
## Steps
1. Clean carboy if needed.
2. Sanitize carboy, bung, airlock, auto-siphon, tubing, and anything touching mead.
3. Place bucket higher than carboy.
4. Siphon gently from bucket to carboy.
5. Keep siphon tip above the sediment layer as much as possible.
6. Avoid splashing.
7. Stop before sucking up a lot of sediment.
8. Attach bung and airlock.
9. Label the carboy with racking date and latest gravity.
10. Record transfer notes.
## Headspace
A 3 gallon batch should fit a 3 gallon carboy closely. Keep headspace low for aging. If volume is short, ask Shard before topping up.
## Do not do yet
- Do not backsweeten before stabilization.
- Do not add extracts without bench trials.
- Do not bottle.
+43
View File
@@ -0,0 +1,43 @@
# Day 3 — Second Nutrient Addition
Approximate timing: about **48 hours after pitch**. Doing this around **9 PM EDT** is fine.
## Goal
Continue staggered nutrient support while fermentation is active.
## Do this
1. Sanitize spoon/paddle or degassing wand and anything else that may touch the mead.
2. Check and record temperature.
3. Observe fermentation activity.
4. Degas gently before adding nutrient.
5. Add:
```text
3 g Fermaid O
```
6. Stir gently to distribute.
7. Replace lid and airlock.
8. Record notes.
## Do not do this yet
- Do not rack.
- Do not stabilize.
- Do not backsweeten.
- Do not add vanilla or butter/butterscotch extract.
## Log line template
```text
Date/time:
Day: 3
Temp:
Added: 3 g Fermaid O
Activity:
Smell:
Foam/krausen:
Notes:
```
+42
View File
@@ -0,0 +1,42 @@
# Day 4 — Third Nutrient Addition
Approximate timing: about **72 hours after pitch**. Doing this around **9 PM EDT** is fine.
## Goal
Finish the scheduled 24/48/72 hour nutrient additions.
## Do this
1. Sanitize spoon/paddle or degassing wand and anything else that may touch the mead.
2. Check and record temperature.
3. Observe fermentation activity.
4. Degas gently before adding nutrient.
5. Add:
```text
3 g Fermaid O
```
6. Stir gently to distribute.
7. Replace lid and airlock.
8. Record notes.
## Notes
- This is the third nutrient addition after pitch.
- After this, the next nutrient decision is Day 5 / 1⁄3 sugar-break dependent.
- Do not add flavoring or stabilizers yet.
## Log line template
```text
Date/time:
Day: 4
Temp:
Added: 3 g Fermaid O
Activity:
Smell:
Foam/krausen:
Notes:
```
+68
View File
@@ -0,0 +1,68 @@
# Day 5 — Sugar-Break / Final Nutrient Check
Approximate timing: around Day 5 after pitch.
## Goal
Decide whether to add the final planned nutrient dose.
The recipe's total Fermaid O plan is:
```text
Day 2: 3 g
Day 3: 3 g
Day 4: 3 g
Day 5 or 1/3 sugar break: 3 g
Total: ~12 g
```
## Best check
If convenient, sanitize sampling tools and take a hydrometer reading.
With original gravity `1.100`, the rough **1/3 sugar break** is around:
```text
~1.067
```
Meaning: if gravity is still above ~1.067 and fermentation is active, the final nutrient addition is usually appropriate. If it has already dropped below ~1.067, skip nutrients unless there is a specific reason.
## If not taking gravity today
If fermentation is still clearly active and healthy, you can generally add the final 3 g Fermaid O on Day 5. Degas first.
## Do this
1. Sanitize tools.
2. Check and record temperature.
3. Optional but useful: take gravity.
4. If adding nutrient, degas gently first.
5. Add:
```text
3 g Fermaid O
```
6. Replace lid/airlock.
7. Record notes.
## Do not do this yet
- Do not stabilize.
- Do not backsweeten.
- Do not add butter/butterscotch/vanilla.
- Do not rack unless something unusual requires intervention.
## Log line template
```text
Date/time:
Day: 5
Gravity:
Temp:
Added: 3 g Fermaid O or skipped
Activity:
Smell:
Notes:
```
+47
View File
@@ -0,0 +1,47 @@
# Days 6–9 — Active Fermentation Watch
## Goal
Leave the mead alone while fermentation continues.
## Do daily
- Check airlock liquid level.
- Check room/fermenter temperature.
- Observe activity: bubbles, foam, aroma.
- Keep it out of direct sun.
- Keep temperature as stable as practical, ideally in the 60s°F for 71B.
## Usually do not do
- Do not add more nutrients unless troubleshooting with a reason.
- Do not rack.
- Do not add flavorings.
- Do not stabilize.
- Do not repeatedly open the bucket just to look.
## Optional
If something seems wrong, take a gravity reading and message Shard with:
```text
Day:
Gravity:
Temp:
Smell:
Visual activity:
Any changes since yesterday:
```
## Normal signs
- Airlock slows compared with peak activity.
- Foam rises and then begins to fall.
- Smell shifts from honey-sweet to yeasty/alcoholic.
## Concerning signs
- Strong rotten egg smell that persists.
- Mold-looking fuzzy growth.
- No activity plus no gravity movement.
- Temperature repeatedly too high.
+37
View File
@@ -0,0 +1,37 @@
# Final Flavor Adjustment Day
## Goal
Make tiny final adjustments only after the mead has had time to integrate.
## Taste for balance
Assess:
- Sweetness
- Honey character
- Vanilla
- Butter/butterscotch impression
- Alcohol heat
- Acidity/brightness
- Body/tannin
- Finish
## Possible adjustments
| Problem | Possible fix |
|---|---|
| Not sweet enough | More honey, after stabilization, in small measured additions |
| Too sweet/flabby | Tiny acid blend addition via bench trial |
| Thin | Tiny tannin addition via bench trial |
| Not enough dessert note | Tiny butter/butterscotch extract via bench trial |
| Too extract-like | Age longer; consider blending with unflavored mead if available |
| Flat | Tiny acid or salt bench trial |
## Rule
Bench trial everything. The full batch is not the testing ground.
## After adjustments
Let the mead rest again before bottling. Flavor often changes after additions integrate.
+42
View File
@@ -0,0 +1,42 @@
# Flavor Aging Week 1–2
Starts after backsweetening and/or vanilla addition.
## Goal
Let honey, vanilla, and dessert notes integrate without overdoing extracts.
## If using vanilla beans
- Split beans before adding.
- Taste every few days.
- Remove beans when vanilla is strong enough.
- Vanilla can creep from pleasant to dominant.
## Weekly checks
- Check airlock liquid.
- Look for renewed fermentation.
- Check clarity/sediment.
- Taste small sanitized samples only when needed.
## Do not rush
Young sweet mead may taste hot, thin, or disjointed. Integration time helps.
## If fermentation restarts
Signs include renewed bubbling, gravity dropping, or pressure signs. If this happens, stop bottling plans and ask Shard.
## Log line template
```text
Date:
Gravity if checked:
Flavor:
Aroma:
Vanilla intensity:
Sweetness:
Any signs of renewed fermentation:
Notes:
```
+1 -1
View File
@@ -1,4 +1,4 @@
# Process Guide — First 5 Gallon Batch
# Process Guide — First 3 Gallon Batch
## Phase 0 — Before brew day
+40
View File
@@ -0,0 +1,40 @@
# Day-by-Day Schedule
This schedule starts from the recorded pitch time:
```text
Day 0 / pitch: 2026-07-16 22:51 EDT
OG: 1.100
Must temp: 74.5°F
Batch: 3 gal honey-butter mead in 6.5 gal bucket
Honey: 9 lb raw honey
```
The exact clock time does not need to be perfect. For nutrient additions, **22-ish hours is okay**; do them at a sane evening time rather than staying up late.
## File index
| Day(s) | File | Main job |
|---:|---|---|
| 1 | [`day-1-brew-day.md`](day-1-brew-day.md) | Brew day / pitch / OG |
| 2 | [`day-2.md`](day-2.md) | Degas + 3 g Fermaid O |
| 3 | [`day-3.md`](day-3.md) | Degas + 3 g Fermaid O |
| 4 | [`day-4.md`](day-4.md) | Degas + 3 g Fermaid O |
| 5 | [`day-5.md`](day-5.md) | 1/3 sugar-break check; possible final 3 g Fermaid O |
| 6–9 | [`day-6-day-9.md`](day-6-day-9.md) | Leave it alone; observe temp/activity |
| 10 | [`day-10.md`](day-10.md) | Optional gravity/temp check |
| 11–13 | [`day-11-day-13.md`](day-11-day-13.md) | Wait/observe |
| 14 | [`day-14.md`](day-14.md) | Gravity/temp check; assess primary |
| 15–21 | [`day-15-day-21.md`](day-15-day-21.md) | Wait for stable gravity / clearing |
| 22+ | [`day-22-plus-rack-if-stable.md`](day-22-plus-rack-if-stable.md) | Rack to secondary only if gravity is stable |
| Secondary weeks 1–2 | [`secondary-week-1-week-2.md`](secondary-week-1-week-2.md) | Clear/age; avoid oxygen |
| Stabilization day | [`stabilization-day.md`](stabilization-day.md) | Add metabisulfite + sorbate once fermentation is finished |
| 24h after stabilization | [`backsweeten-bench-trial-day.md`](backsweeten-bench-trial-day.md) | Honey backsweeten + flavor bench trials |
| Flavor aging weeks 1–2 | [`flavor-aging-week-1-week-2.md`](flavor-aging-week-1-week-2.md) | Vanilla/contact time and tasting |
| Final adjustment day | [`final-flavor-adjustment-day.md`](final-flavor-adjustment-day.md) | Tiny extract/acid/tannin/salt adjustments if needed |
| Bulk aging | [`bulk-aging-month-1-month-3.md`](bulk-aging-month-1-month-3.md) | Monthly checks; bottle only when stable and good |
| Bottling/drinking | [`bottling-and-drinking.md`](bottling-and-drinking.md) | Bottle, age, and drink |
## Big rule
The calendar is a guide. **Hydrometer readings decide.** Do not rack, stabilize, backsweeten, or bottle just because a day number arrived.
+32
View File
@@ -0,0 +1,32 @@
# Secondary Week 1–2 — Clear and Settle
Starts after racking to the 3 gallon carboy.
## Goal
Let the mead clear, settle, and shed harsh young-fermentation character.
## Do weekly
- Check airlock liquid.
- Check for sediment accumulation.
- Check clarity.
- Keep it cool/dark/stable.
- Record observations.
## Avoid
- Avoid opening repeatedly.
- Avoid splashing or shaking.
- Avoid flavor additions until fermentation is confirmed done and stabilization is complete.
## When to consider stabilization
Stabilize only when:
- Gravity is stable.
- Fermentation is complete.
- Mead is off primary sediment.
- You are ready to eventually backsweeten/flavor.
If in doubt, wait longer. Time is usually good for mead.
+41
View File
@@ -0,0 +1,41 @@
# Stabilization Day
Do this only after fermentation is finished and gravity is stable.
## Goal
Prevent renewed fermentation before adding backsweetening honey.
## Requirements before stabilizing
- Gravity stable across multiple readings.
- Mead is no longer actively fermenting.
- Mead is in secondary or otherwise off gross lees.
- You have potassium metabisulfite/Campden and potassium sorbate.
## Steps
1. Read the label dosage for both products.
2. Calculate dose for **3 gallons**.
3. Sanitize anything used to measure/add/stir.
4. Add potassium metabisulfite/Campden at label dosage.
5. Add potassium sorbate at label dosage.
6. Mix gently without splashing.
7. Reattach airlock.
8. Wait at least 24 hours before backsweetening.
9. Record exact products and amounts.
## Important
Stabilizers do not stop a roaring active fermentation. They help prevent renewed fermentation once the yeast is already done.
## Log line template
```text
Date/time:
Gravity:
Temp:
Metabisulfite/Campden amount:
Sorbate amount:
Notes:
```